Kenwood DPX306BT Bedienungsanleitung Seite 25

TROUBLESHOOTING
Symptom Remedy
Correct characters are This unit can only display uppercase letters, numbers, and a
not displayed (e.g. limited number of symbols. Uppercase Cyrillic letters can also
album name). be displayed if [РУССКИЙ] is selected. ( 4)
"NA FILE" Make sure the disc contains supported audio files.
( 19)
"NO DISC" Insert a playable disc into the loading slot.
"TOC ERROR" Make sure the disc is clean and inserted properly.
"PLEASE EJECT" Reset the unit. If this does not solve the problem, consult your
nearest service center.
"READ ERROR" Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
"NO DEVICE" Connect a USB device, and change the source to USB again.
"COPY PRO" A copy-protected file is played.
"NA DEVICE" Connect a supported USB device, and check the connections.
"NO MUSIC" Connect a USB device that contains playable audio files.
• Reconnect the iPod.
"iPod ERROR"
• Reset the iPod.
• Sound cannot • Reconnect the Android device.
• If in [HAND MODE], launch any media player application
be heard during
playback. on the Android device and start playback.
• Sound output only • If in [HAND MODE], relaunch the current media player
from the Android application or use another media player application.
• Restart the Android device.
device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. ( 20)
Symptom Remedy
• Make sure KENWOOD MUSIC PLAY APP is installed on
Cannot playback at
[BROWSE MODE]. the Android device. ( 10)
• Reconnect the Android device and make the
appropriate setting in [ANDROID SETUP]. ( 11)
• If this does not solve the problem, the connected
Android device does not support [BROWSE MODE].
( 20)
• Switch off the developer options on the Android
"NO DEVICE" or "READING"
keeps flashing. device.
• Reconnect the Android device.
• If this does not solve the problem, the connected
Android device does not support [BROWSE MODE].
( 20)
Playback is intermittent or Turn off the power saving mode on the Android device.
sound skips.
• Reconnect the Android device.
"ANDROID ERROR" /
• Restart the Android device.
"NA DEVICE"
• Search from the Bluetooth device again.
No Bluetooth device is
• Reset the unit. ( 3)
detected.
• Make sure you have entered the same PIN code to
Bluetooth pairing cannot
be made. both the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 12)
• Adjust the microphone unit's position. ( 12)
Echo or noise is heard
• Check the [ECHO CANCEL] setting. ( 13)
during a phone
conversation.
• Reduce the distance between the unit and the
Phone sound quality
is poor. Bluetooth device.
• Move the car to a place where you can get a better
signal reception.
21
ENGLISH