Storing Dab Services In Memory; To Tune In To A Particular Ensemble Without Searching - JVC KS-FX772R Bedienungsanleitung

¢
4
To change the display information while
tuning in to an ensemble
Normally service name is shown on the display.
If you want to change the display information, press
DISP (display).
Each time you press the button, the following
information appears on the display for a while.
To tune in to a particular ensemble
without searching:
1 Press and hold DAB (FM/AM) to select DAB
tuner as the source.
2 Press DAB (FM/AM) repeatedly to select the
DAB band (DAB1, DAB2 or DAB3).
3 Press and hold
than 1 second.
¢ or 4
4 Press
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
To restore the FM/AM tuner
Press and hold DAB (FM/AM) again.
32
¢ or 4
2 Press
while still in the functions
mode to select a service.
Clock time
Service name
Ensemble name
Channel number
Frequency
Band/Preset number
¢ or 4
for more
repeatedly until the
,
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner.
DAB
FM/AM
2
Select the DAB band (DAB1, DAB2
or DAB3) you want.
DAB FM/AM
DAB1
3
Tune in to an ensemble you want.
¢
4
4
Select a service you want to listen to.
MODE
¢
4
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
DAB FM/AM
Each time you press the
button, the DAB band
changes as follows:
DAB2 DAB3
1 Press MODE to enter the
functions mode while
listening to the DAB tuner.
This unit enters the
functions mode.
¢ or 4
2 Press
while still in the functions
mode to select a service.
,