How to reset your unit
Press and hold both the SEL (select) and
(standby/on/attenuator) buttons at the same
time for several seconds.
This will reset the built-in microcomputer.
(standby/on/attenuator)
SEL (select)
Note:
Your preset adjustments – such as preset channels or sound adjustments – will also be erased.
How to use the number buttons:
If you press MODE, the unit goes into functions mode and the number buttons work as different
function buttons.
7
8
MO
9
10
11
RPT
12
RND
MODE
«
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds
without pressing any number button until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
2