Storing Your Own Sound Adjustments - JVC KS-FX772R Bedienungsanleitung

Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
SCM
Ex.: When you select "SOFT"
2
Select "BAS (bass)," "TRE (treble)" or
"LOUD (loudness)."
S E L
22
• See page 21 for details.
3
Adjust the bass or treble level or turn
the loudness function ON/OFF.
• See page 20 for details.
4
Repeat steps 2 and 3 to adjust the
other items.
5
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
SCM
Your adjustment made for the selected sound
mode is stored in memory.
6
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 21.