Call History; Phone Book - Kenwood KMM-303BT Bedienungsanleitung

BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or dialing the
number. Call by voice is also possible if your mobile phone has the
feature.
1
Press to enter Bluetooth mode.
2
Turn the volume knob to make a selection (see the following
table), then press the knob.
3 2
Repeat step until the desired item is selected/activated or
follow the instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press

CALL HISTORY

1 Press the volume knob to select a name or a phone number.
• For
call made, "M" indicates call missed.
For
is shown on the lower part of the display to indicate the
previous call status.
• Press
(NUMBER or NAME).
• "NO DATA" appears if there is no recorded call history.
2 Press the volume knob to call.
10
.
: "I" indicates call received, "O" indicates
: "INCOMING", "OUTGOING", or "MISSED"
to change the display category

PHONE BOOK

1 Turn the volume knob quickly to enter alphabet search mode (if the
phonebook contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
• To select the desired first letter, turn the volume knob or press
S / T, then press the knob.
Select "1" to search with numbers and select "
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing.
• Contacts are categorized as:
For
(general)
For
• This unit can display only non-accent letters. (Accent letters such as "Ú" is
showns as "U".)
1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
NUMBER DIAL
2 Press S / T to move the entry position.
1
Repeat steps
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to control
the phone functions. ( 11, Make a call using voice recognition)
BATT *
LOW/ MID/ FULL: Shows the strength of the battery.
SIGNAL *
NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of the current received
signal.
* Functionality depends on the type of the phone used.
*
* " to search with symbols.
: MO (mobile), HM (home), OF (office), OT (others), GE
: HOME, OFFICE, MOBILE, OTHER, GENERAL
2
and until you finish entering the phone number.
), press J / K.