Kenwood KMM-303BT Bedienungsanleitung Seite 6

GETTING STARTED
6
Turn the volume knob to select [12H] or [24H], then press the
knob.
7
Press and hold to exit.
To return to the previous setting item, press
(For )
While in clock display screen...
Press and hold to enter clock adjustment mode
directly.
4
Then, perform step to set the clock.
3
Set the initial settings
1
Press to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to make a selection (see the following
table), then press the knob.
4 3
Repeat step until the desired item is selected or activated.
5
Press and hold to exit.
To return to the previous setting item, press
AUDIO CONTROL
SWITCH REAR/ SUB-W or REAR/ SUBWOOFER: Selects whether rear
PREOUT speakers or a subwoofer are connected to the line out terminals on
the rear (through an external amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size
(5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for
optimum performance.
4
DISPLAY
EASY MENU
.
TUNER SETTING
PRESET TYPE
SYSTEM
KEY BEEP
SOURCE SELECT
BUILT-IN AUX
P-OFF WAIT
.
F/W UPDATE
Default: XX
UPDATE SYSTEM/ UPDATE BT
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ;
ENGLISH
РУССКИЙ
(For )
ON: Both display and button illumination change to white color when
entering [FUNCTION]. ; OFF: Both display and button illumination remain as
[COLOR SELECT] color. ( 15)
NORMAL: Memorizes one station for each preset button in each band (FM1/
FM2/ FM3/ MW/ LW). ; MIX: Memorizes one station for each preset button,
regardless of the selected band.
ON: Activates the keypress tone. ; OFF: Deactivates.
ON: Enables AUX in source selection. ; OFF: Disables. ( 13)
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in standby
mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;
WAIT TIME – – –/ OFF – – –: Cancels
activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
OFF: Cancels.
Selected language is use as the display langauge for [FUNCTION] menu
and Tag information (folder name, file name, song title, artist name, album
name) if applicable.