Call History; Phone Book - Kenwood KDC-X5000BT Bedienungsanleitung

BLUETOOTH®

CALL HISTORY

(Applicable only if the phone supports PBAP)
1 Press the volume knob to select a name or a phone number.
• "INCOMING", "OUTGOING", or "MISSED" is shown on the lower part of the
display to indicate the previous call status.
• Press DISP to change the display category (NUMBER or NAME).
• "NO DATA" appears if there is no recorded call history.
2 Press the volume knob to call.

PHONE BOOK

(Applicable only if the phone supports PBAP)
1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook
contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
• To select the desired first letter, turn the volume knob or press S / T,
then press the knob.
Select "1" to search with numbers and select "
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• The phonebook of the connected phone is automatically transferred to the unit
when pairing.
• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
• This unit can display only non-accent letters. (Accent letters such as "Ú" is
showns as "U".)
1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
NUMBER DIAL
2 Press S / T to move the entry position.
1
Repeat steps
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to control the
phone functions. ( Make a call using voice recognition)
BATT LOW/ MID/ FULL * : Shows the strength of the battery.
NO SIGNAL/ LOW/ MID/ MAX * : Shows the strength of the current received signal.
* Functionality depends on the type of the phone used.
12
*
* " to search with symbols.
2
and until you finish entering the phone number.
Make a call using voice recognition
1 Press and hold
connected phone.
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone.
Refer to the instruction manual of the connected phone for
details.
• This unit also supports the intelligent personal assistant
function of iPhone.
), press J / K.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press
2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK],
or [NUMBER DIAL], then press the knob.
3
Turn the volume knob to select a contact or enter a phone
number.
If a contact is selected, press the volume knob to show the
phone number.
4
Press and hold one of the number buttons (1 to 6).
"STORED" appears when the contact is stored.
To erase a contact from the preset memory, select [NUMBER DIAL]
2
in step
Make a call from memory
1
Press
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
"NO MEMORY" appears if there is no contacts stored.
to activate the voice recognition of the
to enter Bluetooth mode.
and store a blank number.
to enter Bluetooth mode.