Control Panel - HP LaserJet MFP M232e Serie Kurzübersicht

Control panel

Power button
Status light
Blinks when starting up or
processing a job.
Paper light
Blinks when out of paper or paper
is jammed.
Attention light
Cartridge light
Blinks when cartridge needs
attention.
Open Lid light
Open lid and turn over ID card to
copy second side.
Copy Options
Copy button/light
ID Card Copy button/light
Information button/light
Press to print a summary of
printer settings and status.
Wireless button/light
Blinks when trying to connect to a
wireless network.
Resume button/light
Press when lit to continue a job.
Cancel button/light
Do not use USB for setup
Printers with a label covering the USB port must be set up with HP Smart and an Internet
connection. After setup, you can print using a USB cable if needed, but the printer must also
remain connected to the Internet.
1
1
Printer display
codes
Er/01
Load paper.
Er/02
Close the printer cover completely.
Er/07
Reinstall the cartridge.
Er/61
1
WPS connection failed.
Press , and then try connecting the
printer to the wireless network again.
If problem persists, try connecting
using HP Smart.
1
For a complete list of printer display codes,
visit hp.com/support/ljM232eMFP
Wireless model only