Control Panel - HP LaserJet MFP M139e Serie Kurzübersicht

Control panel

Printer display
Shows numerical information for
copy settings and event codes.
Copy Options button
Press to access
Copies),
(Reduce/Enlarge) copy options.
Start Copy/Resume button
Cancel button
Supplies light
Power button
Attention light
Wireless button and light
ID Copy button
Up/Down button
Press to change copy setting value.
Printer display codes
These codes may flash after initially turning on the printer. Complete setup using the HP Smart
software to resolve them.
Error
Er/01
Er/04, Er/05, Er06
Er/07, Er/11
For a complete list of printer display codes and light patterns, refer to user guide on: hp.com/support.
Do not use USB for setup
Printers with a label covering the USB port must be set up with HP Smart and an Internet
connection. After setup, you can print using a USB cable if needed, but the printer must also
remain connected to the Internet. Remove the label to uncover the USB port when needed.
1
(Number of
(Lighter/Darker), or
Action
Load paper.
Clear paper jam. Visit hp.com/support.
Reinstall the cartridge. See Setup Guide.
Light patterns
Ready
Processing
Initializing, cleaning, or
cooling down
Cartridge error
Cartridge very low
Error, manual feed,
manual duplex, or out of
paper
If blinking fast, press
to continue printing or to
print the information page