Fill With Food; Operating Mode; Button Lock - Petsafe Healthy Pet Simply Feed Gebrauchsanweisung

2C. Fill With Food:
Place pet feeder in desired location. Fill hopper with dry or semi-moist food,
allowing room to replace lid.
To Replace Lid: Align front tab on lid into slot
behind the control panel. Lower back of lid and
push down until lid latch snaps into place.
To Prepare Conveyor with Food: If
buttons are locked, press ENTER and UP
buttons AT SAME TIME to unlock. Next press
ENTER and LEFT buttons AT SAME TIME
to prepare pet feeder conveyor to dispense
food. Release buttons when you hear conveyor
moving and filling each section with food
getting ready for the first scheduled meal. Pieces of food may be dispensed into the
bowl. Pour any dispensed food back into hopper. Every time the hopper is empty or
almost empty and is refilled with food, the conveyor must be prepared.
NOTE: If conveyor is not prepared as instructed, no meal or incorrect meal sizes
will be dispensed. Ensure conveyor is properly prepared with food every time
hopper is refilled.

Operating Mode

When you enter Operating Mode, the LCD screen will display the time and size of the
next scheduled meal. The additional modes available in Operating Mode are: Slow Feed
Mode, Immediate Feed Mode, and Pause Feed Mode. Also you can unlock the 5-button
Navigation, view the current set time, change the time or time format and return to Setup
Mode to change the feeding schedule.

Button Lock

After 2 minutes of inactivity, the 5-button Navigation
will lock to prevent it from accidentally being used.
The lock icon will show in the upper left corner
indicating the buttons are locked.
Do NOT use outdoors. FOR INDOOR HOUSEHOLD USE
ONLY. Check operation frequently to be sure the pet feeder
is dispensing properly. For dry and most semi-moist food use
only. DO NOT use wet, canned or moist food. Pet feeder
should be placed on a level surface.
Do not install or store pet feeder where it will be exposed to weather or
temperatures below 4° C.
www.petsafe.net 17