Assemble Pet Feeder - Petsafe Healthy Pet Simply Feed Gebrauchsanweisung

To Remove
Conveyor: Pull
back red conveyor
latch to unlock. Lift
to remove.
1C. Assemble Pet Feeder
Before assembling
pet feeder,
make sure all
parts are clean
and completely
dry. DO NOT
program or
use buttons
until pet feeder
is completely
assembled. DO
NOT fill with food
until instructed in Step 2C.
To Install Batteries:
Push in and lift tabs to remove battery compartment
door on bottom of pet feeder. Install 4 D-cell
alkaline batteries into battery compartment,
matching battery outlines (see diagram). Replace
battery door.
To Install Conveyor: Before installing
conveyor, align one lip on conveyor belt with
alignment arrows
on side of
conveyor housing.
Install conveyor
by first aligning
food chute on
conveyor front with
food chute on front
of hopper base.
Lower back of conveyor and align with gear in hopper base. Push red conveyor
latch to lock in place.
12
Inside View
www.petsafe.net
Inside View