Bosch Aquatak 100 Bedienungsanleitung Seite 13

EURO • Printed in England • BA F016 L69 835 • AQUATAK 100 • GB • OSW 09/01
F016 L69 835.book Seite 2 Donnerstag, 6. September 2001 12:56 12
Product Specification
Power washer
Part number
Rated power
Supply Temperature max. [°C]
Supply rate min.
Supply pressure max.
Working pressure
Max. Operating pressure
Flow rate
Detergent
Weight
Protection class
Serial Number
Intended Use
The product is intended for cleaning areas and ob-
jects outside the house, tools, vehicles and boats.
Drainage pipes can be unclogged and rust or paint
coatings can be removed, if the appropriate acces-
sories such as cleaning agents approved by Bosch
are used.
This product should not be used for professional
use.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approxi-
mately 6.6 kg. If necessary, obtain assistance to re-
move from packaging.
13 • F016 L69 835 • TMS • 21.08.01
Carefully remove the machine from its packaging
AQUATAK 100
and check that you have all the following items:
0 600 872 ...
– Power washer
[W] 1600
40
– Power gun/high pressure hose
[l/h] 17
– Extension lance
[bar] 1.5 – 6.0
– Jet-fan nozzle (pink colour coded)
[bar] 90
– Roto nozzle (pink colour coded)
[bar] 100
– Detergent nozzle and bottle
[l/h] 360
[l] 0.5
– Connector
[kg] 6.6
– Operating instructions
/ II
When parts are missing or damaged, please contact your
See rating details on
dealer.
machine
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
English - 2
Delivered Items
Operating Controls
1 Trigger safety lock
2 Trigger
3 Main switch
4 Power gun
5 Extension lance
6 Mains plug**
7 Inlet connector
8 Water inlet connection
9 High pressure hose
10 Connection (for high pressure hose)
11 Jet-fan nozzle
12 Detergent nozzle and bottle
13 Roto nozzle