Unpacking The Pxtrx Active Energy Management Device; Installing The Pxtrx Active Energy Management Device - Koch PxtRX Betriebsanleitung

4 Transport / Storage / Installation
4.4
4.5
Basic information
Distances
Installation location
14
Operating manual PxtRX active energy management device
V1.1DE/EN

Unpacking the PxtRX active energy management device

Carefully remove the PxtRX active energy management device from its packaging.

Check that nothing is missing and that it is undamaged.

Dispose of the packaging in accordance with local regulations for cardboard boxes

and recyclable materials.

Installing the PxtRX active energy management device

Risk of damage!
Assembly upside down is prohibited!
• The PxtRX active energy management device is intended to be installed in an
electrical cabinet.
• The PxtRX active energy management device must be protected against
penetration of foreign bodies in the cabinet.
• The unit is installed directly on a mounting surface in the control cabinet.
During installation, the following distance to other modules must be maintained:
• Above and below: at least 100 mm.
• Sufficient fresh air supply from below must be available.
• Air circulation in the free space must be ensured.
• PxtRX devices with power module(s) may only be mounted vertically.