Transport / Storage / Installation; Checking The Delivery; Transporting The Pxtrx Active Energy Management Device; Storing The Pxtrx Active Energy Management Device - Koch PxtRX Betriebsanleitung

4
4.1
Scope of delivery:

Checking the delivery:

4.2
4.3
T / S
RANSPORT TORAGE
Checking the delivery
The PxtRX active energy management device leaves the factory in a tested and
perfect condition.
There is a packing label on the outside of the packaging.
Any transport damage is the responsibility of the transport company.
• 1 × PxtRX active energy management device
• 1 × ferrite sleeve
• 1 × Operating manual for the PxtRX active energy management device
The exact scope of larger deliveries will be given on the delivery note.
Check the packaging for damage.

Immediately notify the transport company about any damage to the packaging

and/or the device.
The transport company must receive a written damage report within 7 days.


Transporting the PxtRX active energy management device

Transport the PxtRX active energy management device to the installation site in its

original packaging.
Avoid heavy vibrations and hard knocks.


Storing the PxtRX active energy management device

The PxtRX active energy management device must be stored in clean, dry areas.
Any condensation must be excluded.
Temperatures between -10° C and +65° C are permissible.
Any temperature fluctuations must not exceed 30 K per hour.

4 Transport / Storage / Installation

/ I
NSTALLATION
Operating manual PxtRX active energy management device
13
V1.1DE/EN