Koch PxtRX Betriebsanleitung Seite 52

3 Basic safety instructions
Hot surfaces
Warning symbols
Housing
Functional faults
12
Operating manual PxtRX active energy management device
V1.1DE/EN
Danger of burns from hot surfaces!
Severe burns to the skin from hot surfaces!
The heat sink and metallic parts can heat up to temperatures above 80° C.
A sufficient distance to metal components must be maintained during installation.
When working on the components, allow sufficient cooling time or wear
heat-resistant protective gloves.
Warning symbols are attached to the housing. Any damaged warning symbols must
immediately be replaced.
The housing must not be opened.
In the vicinity of the PxtRX active energy management device, do not use any electri-
cal devices that could affect the function of the PxtRX active energy management de-
vice.