Activating/Deactivating Ta/Pty Standby Reception; Tracing The Same Programme-Network-Tracking Reception; Automatic Station Selection-Programme Search - JVC KD-DV4401E Bedienungsanleitung

Activating/deactivating TA/PTY Standby Reception

TA Standby Reception
Press to activate.
The unit temporarily will switch to Traffic
Announcement (TA), if available, from any
source other than AM.
The volume changes to the preset TA
volume level if the current level is lower
than the preset level (see page 25).
Not yet activated. Tune in to another
station providing the RDS signals.
Press to deactivate.
Tracing the same programme—Network-Tracking Reception
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in to
another FM RDS station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration on the right).
When shipped from the factory, Network-Tracking
Reception is activated.
To change the Network-Tracking Reception
setting, see "AF-REG" on page 25.
Automatic station selection—Programme Search
Usually when you press the number buttons, the preset station is tuned in.
If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes
in to another frequency broadcasting the same programme as the original preset station is broadcasting.
• The unit takes some time to tune in to another station using programme search.
• See also page 25.
12
Indicator PTY Standby Reception
See page 25.
Lights up The unit temporarily will switch to your
favorite PTY programme from any source
other than AM.
Flashes Not yet activated. Tune in to another
station providing the RDS signals.
Goes off Select "OFF" for the PTY code (see page 25)
to deactivate.
Programme A broadcasting on different frequency
areas (01 – 05)
Indicator
Lights up
Flashes
Goes off