Activating/Deactivating Ta/ Pty Standby Reception - JVC KW-AVX820 Bedienungsanleitung

Storing your favorite programme types
You can store your favorite PTY codes into the PTY
Preset List.
Ex.: Storing <Drama> into <Preset 1>
Activating/deactivating TA/
PTY Standby Reception
TA Standby Reception
Press on the monitor panel to
activate.
The unit will temporarily switch to
Traffic Announcement (TA) if available,
from any source other than AM.
• The volume changes to the preset
TA volume level if the current level is
lower than the preset level. (
Not yet activated. Tune in to another
station providing the Radio Data
System signals.
Press to deactivate.
PTY Standby Reception
To activate, display <AV Menu>
screen, press [Mode], then press [On]
for <PTy Standby>. (
The unit will temporarily switch to
your favorite PTY programme from any
source other than AM.
Not yet activated. Tune in to another
station providing the Radio Data
System signals.
To deactivate, press [Off] for <PTy
Standby>. ( 21)
• When a DAB tuner is connected, TA Standby/PTY
Standby Reception also works for the DAB tuner and
searches for the services.
To change the PTY code for PTY Standby Reception,
21.
OPERATIONS
Indicator
TP
Lights up
17)
Flashes
Goes off
Indicator
PTY
21)
Lights up
Flashes
Goes off
Continued on the next page
31