Using The Child Safety Device - AEG Electrolux 88001K-MN Benutzerinformation

Locking/unlocking the control panel
The control panel, with the exception of the "On/Off" sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
Switch on
Switch off
When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
To switch on
To switch off
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field

Using the child safety device

The child safety device prevents unintentional use of the appliance.
Switching on the child safety device
Step
1.
2.
Touch
The child safety device is switched on.
Switching off the child safety device
Step
1.
2.
Touch
Heat setting
Control panel
Touch
Touch
Control panel
Touch
Touch
Switch on appliance. Do not set a heat setting.
for 4 seconds
Control panel
Switch on appliance. Do not set a heat setting.
for 4 seconds
Length of the automatic warm up [min:sec]
Previous heat setting (not automatic warm-up or power
function)
Control panel
Operating the appliance
2:30
2:50
---
Display
(for 5 seconds)
previously set heat setting
Display
Display/Signal
lights up
27
.
Display/Signal