reer BabyCam XL Gebrauchsanleitung Seite 29

A) Signal strength
B) Camera number:
C) Temperature indicator: Temperature indicator of the location of the
D) Zoom:
E) Battery level indicator: The status of the battery is indicated here. When the
Camera Stand-By:
Mute alarm:
The further away the display and camera are from
one another, the weaker the signal will be and the
fewer bars will be displayed. If the camera is out
of range, this is clearly indicated on the screen and
an audible alarm will sound until a connection can
be re-established. If the signal is weak, the image
may occasionally freeze.
Number of the camera currently displayed on the
screen.
connected camera. If the previously set temperature
limits are exceeded, this will be indicated on the
screen and acoustically.
When the Zoom function is activated, this icon appears
and the image is enlarged twofold.
battery level falls below 20%, the icon will start flashing
and an audible alarm will sound. When charging, the
icon will flash and the status light (15) will light up
in red until the battery is fully charged. When this is
achieved, it changes colour and turns green.
Even if the camera is in stand-by mode (VOX mode
or screen auto off), you can always take a quick look
at your baby – even if is no sound is picked up. Press
one of the arrow buttons, the confirmation button,
the volume control, or the menu button. The camera
image will be displayed for 10 seconds.
If you want to mute an audible alarm, press one of
the arrow keys, the confirmation key, the volume
control, or the menu key. The alarm tone will then
stop, but the reason for the alarm will continue to
be displayed as text on the screen until you confirm
it by pressing the confirmation key (14).