6.2 Digital 24 V Inputs / Outputs; 6.2.1 Digital Inputs - Bosch Rexroth PRC 7 00L Serie Typspezifische Anleitung

42/56 Bosch Rexroth AG
No. Word Byte
176 12..14 22..27
...
223

6.2 Digital 24 V inputs / outputs

6.2.1 Digital Inputs

Digital inputs
Tab. 5:
Plug Bits
XGD1 0
1
2
3
4
5
6
7
XGD2 8
9
10
11
12
13
14
15
Bit PRC7000 inputs
ASCII_4 Bit 0
0
..
...
ASCII_9 Bit 7
7
Inputs
Fuse monitoring – FC6
Fuse moniotring – FC7
Speed tip dresser 1
Swiveling device tip dresser 1 back
Swiveling device tip dresser 1 front
Monitoring motor protection switch – QA2 gun
drives
Stroke cylinders tip dress 1 swiveled in/out position
Monitoring motor protection switch – QA4 dresser
drives
Operating protection
+24V detection 3-fold cabinet
Fuse monitoring – FC2
Overload -FC3
Welding release, drive release
Fuse monitoring – FC1
Power circuit breaker ON
No ground fault current
R911407348 | PRC 7x00-Lx/Wx-1300
PRC7000 outputs
Description
Load monitoring in the cabinet
Load monitoring in the cabinet
Not used
Not used
Not used
Circuit braker in the cabinet
Not used
Circuit braker in the cabinet
is to be assigned with US2 signal (safety door
contact)
• 0V: No gun movement via internal servo gun
control allowed
• - 24V: Gun movement via internal servo gun
control allowed
Not used
Load monitoring in the cabinet
Load monitoring in the cabinet
Drive and weld on
Load monitoring in the cabinet
Switch power on
Make sure that the system is switched on but is
not involved in any production process and check
all protective devices of the system (e.g. residual
current monitoring, emergency stop) for correct
function.