Charging The Batteries; Setting The Display Language - OpenScape DECT Phone S6 Base Bedienungsanleitung

¤
Insert the batteries (for
correct +/- direction, see
diagram).
Covering the headset socket
¤
Plug the lug of the rubber cover for the
handset socket into the opening on the left
of the handset.
¤
Press down the cap of the rubber cover.

Charging the batteries

¤
Charge the batteries fully prior to first use in the
charging cradle or using a standard USB mains
adapter.
The batteries are fully charged when the power
icon disappears from the display.
The battery may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Handsets contained in the package have already been registered to the base station.
In the event that a handset is not registered however, (indicated by Please register
handset), register the handset manually (
As soon as power is applied to the handset, a Setup wizard starts.

Setting the display language

¤
Press the control key
on the display, e.g. English
You can also change the display language later on in the Settings
menu.
¤
Fit the battery cover from
the top.
¤
Press the cover until it clicks
into place.
until the language required is selected
press the display key OK
To re-open the battery cover:
¤
Push down the cover.
8,5 h
p. 41).
Deutsch
English
Francais
Handset
9