Operation With A Pabx; Setting The Flash Time - OpenScape DECT Phone S6 Base Bedienungsanleitung

Operation with a PABX

Repeater with encryption
Encryption is activated (default setting).
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function Maximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
As soon as a repeater is registered, it will appear in the repeater list under
Settings System
De-registering a repeater
¤
. . . use
. . . use to select repeater
Operation with a PABX
To find out which settings are required for a PABX, please refer to the PABX user guide.
Setting Tone or Pulse dialling mode
¤
. . . use
Mode OK . . . use

Setting the flash time

¤
. . . use
. . . possible flash times are listed
44
Repeater
to select Settings
De-reg.
to select Settings
to select Tone or Pulse
to select Settings
. . . use
Press and hold the Registration/paging
OK System
Yes
OK Telephony
Select (
OK Telephony
to select flash time
OK Repeater
OK Dialling
= selected)
OK Recall
Select ( = selected)
OK
OK