Changing The System Pin - OpenScape DECT Phone S6 Base Bedienungsanleitung

Changing the system PIN

Secure the telephone's system settings with a system PIN. You must enter the system PIN when,
for example, (de)registering a handset or resetting to the default settings.
Change the telephone's 4-digit system PIN (default setting: 0000):
¤
. . . use to select
OK use to enter the current PIN (if other than 0000)
system PIN Save
Resetting system PIN
Resetting the base station to the original PIN 0000:
¤
Unplug the network cable from the base station
key on the base station
station Press and hold the key for at least 5 secs . . . the base station is reset and the system
PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.
Restoring the phone to default settings
When the settings are reset
•
the date and time are retained,
•
handsets are still registered,
•
the system PIN is retained,
•
Maximum Range is activated and No Radiation is deactivated.
¤
. . . use to select
OK use to enter system PIN
takes around 10 seconds
Settings OK
At the same time reconnect the network cable to the base
Settings OK
OK Yes . . . the base station is restarted. The restart
System OK
OK use
Press and hold the Registration/Paging
System OK
System
System PIN
to enter new
Base Reset
55