Setting Pauses - OpenScape DECT Phone S6 Base Bedienungsanleitung

Saving an access code (outside line code)
Setting the access code (e.g. "0") for dialling using the fixed line network.
¤
. . . use to select
Code OK . . . then
Fixed line network:
Rule:
Save:

Setting pauses

¤
Pause after line seizure:
Pause after Recall key:
Dialling pause (pause after access code): 1 sec
To enter dialling pause when dialling:
¤
Press and hold the hash key
Switching temporarily to tone dialling (Tone)
After dialling the external number or after establishing the connection:
¤
Press the Star key
After the call ends, pulse dialling is automatically reactivated.
Settings OK
¤
Access external line with: . . . use
code, max. 3 digits
¤
For . . . use
dialled
Call Lists: The access code will only prefix numbers from a list (list
of answered calls, list of missed calls).
All calls: The access code prefixes all numbers dialled.
Off: The access code is deactivated and does not prefix any
telephone number.
¤
Save
. . . then
1 sec
3 secs
7 secs
800 ms
1600 ms
3200 ms
2 secs
3 secs
6 secs
. . . a P appears in the display.
briefly.
Operation with a PABX
Telephony OK
to enter or change access
to select when the access code should be
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
Access
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
45