Additional Functions Using The Pc Interface; Transferring Data - OpenScape DECT Phone S6 Base Bedienungsanleitung

Changing the Bluetooth name of the handset
The handset is shown by this name on another Bluetooth device.
¤
. . . use to select
the device address are shown

Additional functions using the PC interface

The Gigaset QuickSync program has been installed on the computer.
QuickSync functions:
• Sync the handset's directory with Microsoft® Outlook®
• Upload CLIP-pictures (.bmp) from the computer to the handset
• Upload pictures (.bmp) as screensavers from the computer to the handset
• Upload sounds (ringtone melodies) from the computer to the handset
• Update firmware
• Cloud synchronisation with Google™
¤
Connecting the handset to the computer via Bluetooth or via a USB data cable.
Connect the handset directly to the PC and not via a USB hub.

Transferring data

Data transfer using Bluetooth:
•
The computer has Bluetooth capability.
•
A USB data cable is not plugged in. If a USB data cable is plugged in during an
existing Bluetooth connection, the Bluetooth connection is interrupted.
¤
Launch the Gigaset QuickSync program on the computer.
The message Data transfer in progress is shown on the display during data transfer between
the handset and PC. During this time, it is not possible to enter any data using the keypad and
incoming calls are ignored.
Additional functions using the PC interface
Bluetooth OK
Change . . . use
Own Device OK . . . the name and
to change the name Save
39