Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Adjust the sensor:
Save:
Headset – volume correction
Change the call volume for the wired headset. In addition to the standard settings for the call
volumes, here you can compensate the audio setting characteristics of your headset.
¤
. . . Use
to select
to set the volume
Microphone sensitivity
Adjust the sensitivity of the microphone for the receiver or wired headset. This gives you
improved acoustics in loud environments and when there are echoes.
¤
. . . Use
to select
select what the setting applies for (Earpiece / Corded headset)
sensitivity
Save
Earpiece and handsfree profile
Select a profile for the earpiece and handsfree mode in order to adapt the telephone as much
as possible to the surroundings. Check which is the most comfortable profile for you and your
caller.
¤
. . . use
to select
Earpiece Profiles / Handsfree Profiles
Select (
= selected)
Earpiece Profiles: High frequency or Low frequency (default setting)
Handsfree Profiles: Standard (default setting) or Reduced Echo
Ringtones
Ringtone volume
¤
. . . use
to select
Ringtones (Handset)
to select For internal calls and alarms or External Calls
use
to set volume in 5 levels or in crescendo mode
(increasing volume)
Changes are only saved permanently in Profile
Personal.
¤
Sensitivity
¤
Save
Audio Settings
Save
Audio Settings
Audio Settings
Audio Settings
OK
Volume
Save
Use
to adjust the sensor sensitivity
OK
Corded Hdst Boost
OK
Mic Sensitivity
Use
OK
Acoustic Profiles
OK
use
to select profile
Example
OK
OK
use
For internal calls
and alarms:
<
External Calls:
Back
Handset
Use
OK
Use
to
to adjust the
Volume
>
Save
49
Werbung
Kapitel
Inhaltsverzeichnis
