Locating A Handset (Paging) - OpenScape DECT Phone S6 Base Bedienungsanleitung

Multiple handsets
Registering a handset to multiple base stations
Your handset can be registered to up to four base stations. The active base station is the base
station to which the handset was last registered. The other base stations remain saved in the list
of available base stations.
¤
. . . use
OK . . . possible options:
Change active base station:
Change name of a base station:
De-registering the handset
¤
. . . use
Handset OK . . . the handset being used is selected
handset if desired
with Yes
If the handset is still registered to other bases, it switches to the base with the best reception
(Best Base).

Locating a handset (Paging)

¤
Briefly press the Registration/paging key on the base station.
All handsets will ring at the same time (paging), even if ringtones are
switched off.
Ending the search
¤
Briefly press the registration/paging key on the base station
or Press the End call key
or Press the display key Silence on the handset
or No action. After approx. 30 seconds, the paging call will end
automatically.
42
to select Settings
¤
. . . use or Best Base to select base station
( = selected)
Best Base: The handset chooses the base station with the best
reception as soon as it loses connection to the current base station.
¤
. . . use to select a base station
Name change name
to select Settings
OK . . . enter system PIN if desired
on the handset
OK Registration
Select (
Save
OK Registration
. . . use
OK
OK Select Base
Select
= selected)
OK De-register
to select a different
. . . confirm de-registration
Paging
Silence