Handset; Connecting The Charging Cradle; Setting Up The Handset For Use; Inserting The Batteries - OpenScape DECT Phone S6 Base Bedienungsanleitung

Handset

¤
Depending on the model, if included in the delivery: Click the cover into place in the notches
on the back of the base (not if mounting on a wall).
¤
Plug in the power adapter
If connecting to a router:
¤
Plug the phone cable into the telephone connection socket on the router
The network cable must always be connected in order to function, as the phone will
not operate without a power supply.
Handset

Connecting the charging cradle

¤
Connect the flat plug of the power
adapter .
1
¤
Plug the power adapter into the power
socket .
2
To remove the plug from the charging cradle
again:
¤
Disconnect the power adapter from the
mains power supply.
¤
Press the release button
¤
Pull out the plug

Setting up the handset for use

The display is protected by a plastic film.

Inserting the batteries

Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
8
3 and the phone jack
.
3
.
4
4 .
2
Please remove the protective film!
5 .
1
4
3