Operating Elements; Operation - Olympia UV 588 Bedienungsanleitung

Operating Elements

UV 586, UV 587
UV 588
6
5

Operation

Switching the UV Lamp On and Off
If you do not intend to use the UV lamp for a longer
period, disconnect the UV lamp from the power
supply.
UV 586
Connect the power plug to a properly installed power
socket.
Set the switch [1] to position "I" to switch the UV
lamp on.
Set the switch [1] to position "0" to switch the UV
lamp off.
On
8
1
2
4
Off
UV 587
Use the USB cable supplied to connect the UV lamp to
the power supply.
Connect the micro USB plug to the socket in the UV
lamp.
Connect the USB A plug to a USB power
supply (5 V, 1 A).
Set the switch [1] to position "I" to switch the UV
lamp on.
Set the switch [1] to position "0" to switch the UV
lamp off.
UV 588
Use the USB cable supplied to connect the UV lamp to
the power supply.
Connect the micro USB plug to the "DC Input,
Charging Port" socket [9] on the UV lamp.
Connect the USB A plug to a USB power
supply (5 V, 1 A).
7
3
Set the "Battery/DC" switch [8] to "DC".
Set the switch [2] to position "I" [11] for the UV test.
Set the switch [2] to position "II" [12] for white light
and magnetic strip test.
Set the switch [2] to position "0" to switch the UV
lamp off.
11
G
On Off
8 9
Off
10
12