Stanley NB08PT-18 Bedienungsanleitung Seite 23

6.15.1 Standard tools
After completing the data reading, you can see
the data stored in the tool like a picture below.
"date_counter_log" fi le includes the number of
fastening on a day or in a month. Those can be
seen in Windows Notepad etc. After working,
disconnect the USB cable from the tool.
6.15.2 Smart enabled tools
After completing the data reading, you can see
the data stored in the tool like a picture below.
The data until 10,000 are stored in the "10000"
folder, if you open the folder, you can see
folders for each 1,000 data.
"csv. " fi les are the data for the rivet curves and
assessment results. You can open the csv fi les in
your Microsoft Excel etc.
Copy the fi les accordingly. *If you try to copy
a lot of data, it takes much time, please copy
them little by little and you cannot delete the
data in this menu.
Date fi le includes the number of fastening on
that a day or in that a month.
After working, disconnect the USB cable from
the tool.
NB08PT-18
Data for number of fasteners
NB08PT-18
Not Available
Process data folder Data for number of riveting
23
E N G L I S H
PB2500Smart
When Smart is disabled
Do not use
PB2500Smart
Do not use