Mounting The Cooling Unit On The Switch Cabinet - Pfannenberg DTT 6801 Serie Betriebsanleitung

ENG
4.5.4

Mounting the cooling unit on the switch cabinet

Mounting the cooling unit
Fig. 15: Assembly of the cooling unit with locking levers
Prerequisites
DANGER – Danger to life due to electric shock. Make sure that the unit is voltage-free.
• All general requirements are fulfilled, see chapter "General", Page 30.
• The M8 jack rings (1) are screwed into the cooling unit, see chapter "Crane transport", Page 28.
• The cooling unit is properly secured with lashing straps.
• The switch cabinet is aligned exactly horizontally.
Required tools and materials
• Lashing straps, loading crane if necessary
Operating Manual | Roof-mounted Cooling Unit | Standard Controller (SC) – 400 / 460 V, 3~ | 086100040b
Locking the cooling unit with locking levers
G00037
32/33