Caliber mcd 893 Bedienungsanleitung Seite 70

Vehicle types:
•
Car
•
Taxi
•
Bus
•
Emergency vehicles
•
Bicycle
•
Pedestrian
Road Types Used for Route Planning:
Type
Motorways You might need to avoid motorways when you are driving a slow car or you are
towing another vehicle.
Unpaved MCD893 excludes unpaved roads by default: unpaved roads can be in a bad
roads condition and usually you cannot reach the speed limit on them.
Toll roads By default MCD893 includes toll roads (pay roads where there is a per-use
charge) in the routes. If you disable toll roads, MCD893 plans the best toll-free
route.
Charge
Charge roads are pay roads where you can purchase a pass or vignette to use
roads
the road for a longer period of time. They can be enabled or disabled separately
from toll roads.
Permit
You might need a permit or permission from the owners to use certain roads or
needed
to enter certain areas. MCD893 excludes these roads from the route calculation
by default.
Ferries
MCD893 includes ferries in a planned route by default. However, a map does not
necessarily contain information about the accessibility of temporary ferries. You
might also need to pay a fare on ferries.
Cross-
In some cases the route calculated according to your other navigation and route
border
preferences would lead through another country. If you wish to always stay
planning
within the same country, turn this option off.
Carpool
This control appears only when navigating in the USA. You should check
lanes
whether you are allowed to use carpool lanes before enabling this road type.
Route Calculation Method types:
Option
Fast
Short
Economical
Gives the quickest possible route if you can travel at or near the speed
limit on all roads. Usually the best selection for fast and normal cars.
Gives a route that has the smallest total distance of all possible routes
between the route points. Usually practical for pedestrians, cyclists or
slow vehicles.
Combines the benefits of Fast and Short: MCD893 calculates as if it
Description
Description
69