Caliber mcd 893 Bedienungsanleitung Seite 17

Icon
Time
information
Distance
information
The next area is a combined status field. Tap this area to open the Quick menu.
Icon Status for
GPS position
quality
Vehicle type
2.4.4 Using the Cursor (the selected map location)
First, place the Cursor at the desired map location with one of the following options:
•
Use the Find menu to select a location. The map returns with the selected point (the
Cursor) in the middle, and the Cursor menu appears with the available options.
•
Tap the screen and tap again to place the Cursor at the desired location. Now tap
to open the Cursor menu.
You can perform the following actions:
Button
In the active route, uses the Cursor as the start point by replacing the
current GPS position (available in Advanced mode only)
In the active route, uses the Cursor as the destination by replacing the
previous destination
In the active route, uses the Cursor as a via point (an intermediate
destination) preceding the destination (available in Advanced mode only)
In the active route, uses the Cursor as the destination while keeping the
previous destination as a via point (available in Advanced mode only)
Shows the different routes calculated by the available routing methods.
Choose the one that suits your needs the best.(available in Advanced
mode only)
Saves the Cursor as a POI(available in Advanced mode only)
16
Type
There are time values that can be shown:
•
Current GPS time
•
Time remaining to reach the destination
•
Time remaining to reach the next via point
•
Estimated arrival time at the destination
•
Estimated arrival time at the next via point
There are distance type values that can be shown:
•
Distance remaining to reach the destination
•
Distance remaining to reach the next via point
•
Current altitude
The more lit bars, the better is the GPS position.
The symbol displays the vehicle type used for route calculation.
More information
More information
Action