Caliber mcd 893 Bedienungsanleitung Seite 56

Name
route. The calculation cannot take into account
traffic jams and other possible delays.
Distance Left Shows the distance you need to travel on the
route before reaching your final destination.
Time Left Shows the time needed to reach the final
destination of the route based on information
available for the remaining segments of the
route. The calculation cannot take into account
traffic jams and other possible delays.
Method This field shows how the route was calculated.
It either displays the Route Calculation Method
or the Vehicle field from the Route Planning
options. If you have chosen Car, Taxi or Bus,
the type of the route (Fast, Short, Easy or
Economical) will be displayed here; if you have
selected Emergency, Bicycle or Pedestrian, this
information will be displayed here.
Warning icons
In these square fields graphical symbol are
displayed in case warnings are attached to the
planned route. These are warnings, so icons
always show information for the whole route,
even if the data fields display values from your
current position to a via point only.
Appears only if at least one via point exists.
Appears only if there are no via points in the
route.
4.1.7 Trip Information screen
The Trip Information screen has both route and travel data you might need during your
journey. It can be opened directly from the Map screen by tapping the Trip Data field (
The fields on this screen are continuously updated while you keep the screen open.
Description Function
Tap this field to change the
content of all data fields to
via point information.
Tap this field to change the
content of all data fields to
via point information.
Tap this field to change the
content of all data fields to
via point information.
Tap any of the icons for an
explanation.
Opens the Route Planning
options screen
theSettings menu.
Opens the map screen
designed for route planning.
Deletes the next via point
from the route.
Deletes the active route.
from
).
55