Inhaltsverzeichnis
Werbung
Instructions for Use
7
Repeat the sequential tightening for two more cycles.
8
Continue tightening the bolts until the flange faces meet and a pronounced
increase in torque is felt.
Note that it is possible to install the screws also from the lower side, even if in some
positions this may be uncomfortable. If for any reason screws cannot be installed
neither from the upper side, studs must be used.
Figure 34 Stud mounting
200
Agilent VacIon Plus 800 User Manual
Werbung
Kapitel
Inhaltsverzeichnis
