Softmenu Setup - Abit Fatal1ty F-190HD Bedienungsanleitung

2.1 SoftMenu Setup

This option configures the CPU's clock and voltage.
Brand Name: Genuine Intel(R) CPU 2.80GHz
Frequency : 2.80GHz
CPU Operating Speed
x - External Clock
x - Multiplier Factor
x - Estimated New CPU Clock
x - DRAM Spec. (CPU:DRAM)
Voltages Control
x - CPU Core Voltage
x - DDR2 Voltage
x - NB 1.8 Voltage
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Brand Name
This item displays the CPU model name installed on this motherboard.
Frequency
This item displays the processor speed of the CPU installed on this motherboard.
CPU Operating Speed
This item displays the CPU operating speed according to the type and speed of your CPU. Select
the [User Defined] mode to enter the manual option.
Manual Option:
The wrong settings of the multiplier and external clock in certain
※
circumstances may cause CPU damage. Setting the working frequency higher
than the PCI chipset or processor specs, may cause abnormal memory module
functioning, system hangs, hard disk drive data lose, abnormal functioning of
the VGA card, or abnormal functioning with other add-on cards. Using
non-specification settings for your CPU is not the intention of this explanation.
These should be used for engineering testing, not for normal applications.
There will be no guaranty for the settings beyond specification. Any damage of
※
any component on this motherboard or peripherals resulting therein is not our
responsibility.
- External Clock
This item selects the front side bus frequency.
Due to the specification limit of the CPU you installed, the speed you set over
※
its standard bus speed is supported, but not guaranteed.
- Multiplier Factor
This item displays the multiplier factor for the CPU you installed.
2-2
Phoenix – AwardBIOS CMOS Setup Utility
SoftMenu Setup
2800(200)
200MHz
14 X
2.80GHz
By SPD
Default
1.300V
1.80V
1.800V
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
F-I90HD