Troubleshooting - horeca G2XS Serie Bedienungsanleitung

4.
ROUTINE MAINTENANCE

Troubleshooting

Whenever the appliance does not work properly, try to solve the less serious problems using
this table.
FAULT
The appliance does not turn on.
The light indicators do not turn
on.
The gas appliance does not turn
on.
Abnormal flame
Pilot light goes out
If the problem cannot be resolved, turn the appliance off, disconnect it from the electrical mains
and shut all the supply valves. Then contact authorized customer service
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
POSSIBLE CAUSE
•
The master switch is not con-
nected.
•
The residual current device
or circuit breaker has tripped.
•
Gas cock closed.
•
Air in the piping
•
Incorrect position of the bur-
ner
•
Burner flange blocked
- 15 - 15
OPERATION
•
Connect the master switch.
•
Contact authorized customer
service
•
Open the gas cock
•
Repeat switching on opera-
tions
•
Place the burner in the correct
position (see Cap.7 – Flex
Burner)
•
Free the flange from
blockage that prevents air cir-
culation (see Chap. 3 Instruc-
tions for Use - Daily Start of
Operations)
any