Silvercrest SND 3600 A2 Bedienungsanleitung Seite 71

Handling and operation
♦ For this, fi rst slide the slider away from the scanner to the dead
stop. Then carefully move the slider back towards the scanner.
NOTICE
► A slide located in the scanner is thereby removed from the
appliance and a new slide is pushed into the visual range of
the scanner.
► Be sure to insert a new slide into the scanner slowly. If this
happens too quickly, then the slide could glide outside the
visual range of the scanner. In this case, you will need to
raise the appliance slightly to the side, so that the slide can
glide back to an optimal position.
♦ When you have decided to fi nish scanning the slides, remove
the slide magazine
last slide from the bottom of the viewing window of the slide
magazine
SND 3600 A2
from the insert slot
6
.
6
3 . Remove the
GB
67