Operating Instructions; Automatic Switch-Off; The Heat Setting - AEG HC652600EB Benutzerinformation

30

Operating instructions

Display
OptiHeat Control (3 step Residual heat indicator)
WARNING!
\ \
OptiHeat Control indicates the level of the residual heat. The induction cooking zones make
the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.
OPERATING INSTRUCTIONS
On and Off
Touch for 1 second to start or stop the appliance.
Automatic Switch Off
The function deactivates the appliance automatically if:
• All roasting zones are deactivated
• You do not set the temperature after you activate the appliance.
• You spill something or put something on the control panel for more than 10 seconds, (a
pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove
the object or clean the control panel.
• You do not deactivate a roasting zone or change the temperature. After 90 minutes
comes on and the appliance deactivates. Before next use, set the roasting zone to

The heat setting

Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.
If you set the temperature, the display flashes until the roasting zone reaches the tempera-
ture. Then a signal sounds and the display shows the temperature.
The Timer
The Count Down Timer.
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
The Automatic Switch Off function operates.
Risk of burns from residual heat!
Description
.
.