Installation Instructions - AEG HC652600EB Benutzerinformation

• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the
glass ceramic if you move them on the surface.
• Do not let cookware boil dry to prevent the damage to cookware and glass ceramics.
• Do not use the cooking zones with empty cookware or without cookware.
• Do not cover the parts of the appliance with aluminium foil.
• Do not cover the ventilation space of 5 mm between the worktop and front of the unit
below it.
WARNING!
If there is a crack on the surface, disconnect power supply to prevent the electric shock.
Special notes for the Teppan Yaki
• You can hear noises when the appliance operates. The noises are normal and do not refer
to appliance malfunction.
• If you use the appliance frequently, a small unevenness can form in the middle of the
cooking surface where the 2 zones touch. This is not a defect in the cooking surface and
its operation is not affected. Therefore:
– Do not put cookware in the middle of the cooking surface between the zones, as the
unevenness can make them unsteady.
– Frying on the surface, where the zones touch, can cause in uneven browning (e. g.
with pancakes).

INSTALLATION INSTRUCTIONS

Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The
rating plate of the appliance is on its lower casing.
Made in Switzerland
220-240V ~50/60Hz
5,6 kW/Leistung ind. 5,6 kW
Typ: 55TEP01AU
Installation instructions
PNC: 941 560 808/00
Serie:
HC652600EB
23