Preface; Notices; Safety - Nederman FX2 Original Serie Bedienungsanleitung

1

Preface

Read all product documentation and product identification plate carefully before
installation, use, and service of this product. Replace documentation immediately if lost.
Nederman reserves the right, without previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements of relevant EC directives. To maintain
this status, all installation, maintenance and repair is to be done by qualified personnel
using only Nederman original spare parts and accessories. Contact the nearest authorized
distributor or Nederman for advice on technical service and obtaining spare parts. If there
are any damaged or missing parts when the product is delivered, notify the carrier and the
local Nederman representative immediately.
2

Notices

This document contains important information that is presented as either a warning,
caution or note. See the following examples:
WARNING! Risk of personal injury.
Warnings indicate a potential hazard to the health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage.
Cautions indicate a potential hazard to the product but not to personnel, and how that
hazard may be avoided.
NOTE! Notes contain other information that is important for personnel.
3

Safety

This document contains important information that is presented as either a warning,
caution or note. See the following examples:
WARNING! Risk of personal injury.
• Always read section 3. Safety before installation, use, service, or troubleshooting of this
product.
•
Follow all local rules and regulations for installation, service and troubleshooting of this
product.
•
The product must not be used for extracting such dust/gas-mixtures which could affect
the product materials. See figure 3.
•
The Extractor Arm must not be used for extracting gas-mixtures in explosion category
II C *.
• Do not use the Extractor Arm for EX/ESD applications.
•
The Extractor Arm must not be used for extracting poisonous substances.
•
Check that no objects which can cause sparking or fire can be drawn in to the arm.
•
Avoid mixing dust from different processes, for example service works and plastic
grinding mixed with metal grinding.
CAUTION! Risk of equipment damage.
Use only Nederman original spare parts and accessories.
FX Original/Chem EN
2
15