F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter – M3 / M4
2. Fitting...
Fig. 28
Replace the outer plate nut of the engine bay cover
with the threaded plate nut supplied.
Fig. 29
Cut away the engine bay covering at the marked point
using an air saw or similar. Fabric cover in the vehicle
also cut out.
Fig. 30 & 31
Cut side air guides as shown.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 282 540-550 / Issue: 13.03.2017 / TSch / REV04
80mm
30mm
30
30mm
Fax -135