AC Schnitzer 5111 282 540 Montageanleitung Seite 18

G e n e r a l N o t e s !
AC Schnitzer Front Splitter – M3 / M4
Important Notes!
These Fitting Instructions must be read in full before beginning installation work. AC Schnitzer bears no liability for
damage caused by incorrect installation!
These Fitting Instructions are intended solely for use by authorised AC Schnitzer dealers.
These Fitting Instructions are in all cases directed at professionals trained in BMW vehicles who have the
corresponding specialist knowledge.
All diagrams show LHD vehicles, for RHD vehicles proceed accordingly or follow separate Fitting Instructions.
Fitting
Carry out all work in accordance with applicable safety regulations (e.g. wear safety goggles).
Components and surfaces to be glued together must first be thoroughly cleaned with cleaner!
The adhesive drying time is 24 hours. The vehicle can be washed in a car wash after approx. 48 hours.
The AC Schnitzer front splitter can only be fitted in conjunction with...
..........Front Spoiler Elements Carbon 5111 280 510
Fitting Time (1 unit = 5 minutes)
The fitting time is 24 units, which may vary depending on vehicle condition and equipment level.
Tools Required
Masking tape
Various socket T-wrenches
Cutter, air saw or similar
Cordless drill with 6.5mm bit
Various hex spanners and ring spanners
Reversing ratchet with extension and various sockets
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 282 540-550 / Issue: 13.03.2017 / TSch / REV04
18
Fax -135