AC Schnitzer 5111 282 540 Montageanleitung Seite 26

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter – M3 / M4
2. Fitting...
Figs. 16 & 17
The holes in the AC Schnitzer front splitter fixings
must align with the fixing points on the standard front
skirt.
Then attach the AC Schnitzer front splitter to the
standard front skirt at these fixing points using the
black hex screws Ø 5x35mm supplied.
Figs. 18 & 19
Drill a 6.5 mm hole through the AC Schnitzer front
spoiler carbon elements and the standard front skirt
at the outer fixing points (1 & 2) on the right and left
of the AC Schnitzer front splitter.
Drill a 6.5 mm hole through the AC Schnitzer front
spoiler carbon elements at the outer fixing points (3)
carefully.
Attention !
Not pierce - top of the AC Schnitzer front spoiler
element not damage.
Then remove the black Ø 5x35mm fixing bolts
previously screwed in.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 282 540-550 / Issue: 13.03.2017 / TSch / REV04
26
Fax -135