AC Schnitzer 5111 282 540 Montageanleitung Seite 22

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter – M3 / M4
2. Fitting...
Fig. 4
Unscrew fixing screws (1) in the wheelarch and the top
of the standard front skirt (2). Remove the standard
front skirt from the vehicle by pulling forwards. Beware
of the wiring harness and hose for the headlamp
washer system. Separate wiring harness plugs and
hose connectors.
Fig. 5
Unscrew the two registration plate holder fixing
screws.
Fig. 6
Drill a 6.5 mm hole through the front skirt, through the
holes in the registration plate holder.
Then remove registration plate holder.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 282 540-550 / Issue: 13.03.2017 / TSch / REV04
2
1
22
Fax -135