AC Schnitzer 5111 282 540 Montageanleitung Seite 28

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter – M3 / M4
2. Fitting...
Fig. 22
At the inner fixing point (Fig. 18 point 3) of the AC
Schnitzer front splitter, attach the AC Schnitzer front
splitter using the cap-head bolt Ø 6x16mm, washer
U6 and self-locking nut M6 supplied.
Fig. 23
At the fixing point (Fig. 18 point 4) of the AC Schnitzer
front splitter, place the long sleeve Ø 20x40mm
supplied between the AC Schnitzer front splitter and
the standard front skirt. To do this, guide the sleeve
through the existing opening in the AC Schnitzer front
spoiler carbon element.
Secure at the standard fixing points of the standard
front skirt using the black Ø 5x35mm bolt supplied
(see Fig.16). Serves the AC Schnitzer front splitter at
the next working steps.
Fig. 24
Push the AC Schnitzer carbon centre bar between the
standard front skirt and the AC Schnitzer front splitter
and align centrally.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 282 540-550 / Issue: 13.03.2017 / TSch / REV04
=
28
=
Fax -135