AC Schnitzer 5111 282 540 Montageanleitung Seite 24

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter – M3 / M4
2. Fitting...
Fig. 10
Secure the AC Schnitzer fixing bracket from the
outside of the standard front skirt, using the cap-head
bolt Ø 6x10mm through the bottom hole.
Refit registration plate holder.
Fig. 11
Secure the AC Schnitzer fixing bracket from the
outside of the standard front skirt, using the cap-head
bolt Ø 6x16mm through the top hole in the
registration plate holder.
Refit standard front skirt.
Figs. 12
Remove the lower support (2) of the standard front
skirt. Screw the both screws (1).
Lower support is not used again.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 282 540-550 / Issue: 13.03.2017 / TSch / REV04
2
24
1
Fax -135