Hints And Tips - Electrolux GK78TSIPCN Benutzerinformation

16 www.electrolux.com
6.5 PowerSlide
This function allows you to adjust the
temperature by moving the cookware to
a different position on the induction
cooking area.
The function divides the induction
cooking area into three areas with
different heat settings. The hob detects
the position of the cookware and adjust
the heat setting corresponding with the
position. You can place the cookware in
the front, middle or rear position. If you
place the cookware in the front you get
the highest heat setting. To decrease it,
move the cookware to middle or rear
position.
Use only one pot when you
operate the function.
If you want to change the
heat setting, lift up the
cookware and place it on a
different zone. Sliding the
cookware can cause
scratches and discolouration
of the surface.

7. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
• 160 mm is the minimum bottom
diameter of the cookware for this
function.
• If you place the pot in the front
position, lights up on the control
panel. The control bar displays the
default heat setting
• If you place the pot in the middle
position, lights up on the control
panel. The control bar displays the
default heat setting
• If you place the pot in the rear
position, lights up on the control
panel. The control bar displays the
default heat setting
• To change the default heat setting
use left front control bar. You may
change the default heat setting only if
the function is active. You can change
the heat settings for each position
separately. The hob will remember
your settings next time you activate
the function.
Touch to activate the function.
The indicator comes on and the control
bar displays the default heat setting.
To deactivate the function, touch
.
.
.
.