Electrolux GK78TSIPCN Benutzerinformation Seite 15

6.3 FlexiBridge Big Bridge
mode
To activate the mode touch
see the correct mode indicator
mode connects three rear sections into
one cooking zone. The front section is
not connected and operates as a
separate cooking zone. You can set the
heat setting for each zone separately.
Use two left side control bars.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected
sections. If you use cookware smaller
than two sections the control bar blinks
and after 2 minutes the zone switches
off.
Incorrect cookware position:
6.4 FlexiBridge Max Bridge
mode
To activate the mode touch
see the correct mode indicator
mode connects all sections into one
cooking zone. To set the heat setting use
until you
any of the two control bars on the left
. This
side.
Correct cookware position:
To use this mode you have to place the
cookware on the four connected
sections. If you use cookware smaller
than three sections the control bar blinks
and after 2 minutes the zone switches
off.
Incorrect cookware position:
ENGLISH 15
until you
. This