Rotel U445CH1 Gebrauchsanweisung Seite 48

3.
4.
5.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Fit the meat grinder body (8) in the acces-
sory socket (12), so that the arrow is
aligned with the circle. Turn it to the verti-
cal position, so the two arrows are aligned.
Fit the meat tray (9) onto the meat grinder
body (8) so that the wide part is positioned
over the motor house of the appliance.
Place the mixing bowl (23) or similar under
the meat grinder body opening.
The appliance is now ready for use.
Plug the power cord into main power
socket.
Cut your meat into smaller pieces, so the
pieces fit into the feeding tube. Dice or cut
into strips with a width of approx. 2.5 cm.
Put the pieces onto the tray (9).
Select the speed you want by turning the
speed control knob (15) slowly to the right.
Recommended speeds are shown in the ta-
ble above.
The meat pieces travel down the feeding
tube. Push down carefully with the tamper
(10). Do not press too hard, otherwise you
may damage the appliance.
48